TOPOINT ARCHERY Bow Sight 3 Pin Bow Sight - Fiber, Brass Pin Compound Bow Sight Aluminum Compound Bow Sight Recurve Bow Accessories - Right and Left Handed

Got back into archery after 50 years -- bought a Sage Samick take-down recurve (40#) and after nearly missing my basement target (2.5 ft square) several times I decided to try a sight.Sights at my local stores were pretty expensive ($50 - $150), so I decided to try a budget one. For $15 I'm very impressed at the quality: The mounting and adjustment hardware is cast aluminum and very sturdy; The sighting ring is some kind of very hard plastic. I suppose you could break it if you really tried, but it also seems rock solid.It took a while to get mounted since I, at first, thought that the screws were the wrong size -- they didn't want to go into the inserts in the bow. After checking out every other possible screw size at my local hardware store, I discovered that lacquer had gotten in the holes when the bow was made, and you just had to grit your teeth and force the screws in the first time. It's easy to take the sight off to store the bow in the take-down case (two mounting screws), and the the sight position remains the same when re-mounted.Adjustments are pretty basic -- you loosen things up, move them, and tighten them again. However, the scales engraved on all the moving parts allow you to make very small, accurate movements -- just remember to notice where they are set before you loosen the screw(s)! Once the screws are tightened, nothing ever moves.I saw ads for peep sights to go in the string, but my string won't separate at the place where it should go, so I wrapped and tied a short piece of dental floss around the string there as a sighting aid. I'm thinking about trying some paint, but will wait until I have a spare string, just in case it doesn't like the paint base.How does it work? Well, after some adjustment and practice time, I'm now putting three arrows into a 2 inch diameter circle at 10 yards consistently. (I'm afraid to shoot more than 3 at a time for fear I'll "Robin Hood" one of them.) I will be trying it out at longer ranges when the weather improves. This is, without a doubt, the most accurate I have ever been with a bow.Frankly, there doesn't seem to be any good reason to "move up" to a more expensive sight.

This is a perfect little bow sight. It has just what you need to get a sight on and go hunting. It's not the most expensive but let me tell you it's worth every penny. I am absolutely happy with this purchase after trying many others.

Nice and solid, works fine. If you're wondering why someone would pay more for a better sight, there are two major reasons that I observed. 1) This doesn't gather light nearly as well as the expensive ones, which means as dusk approaches, you're going to be blind earlier than you would be with a better sight. And dusk is when deer are most active. 2) No micro-adjustments. If you want to move your pin a hair up or down, you have to loosen the screw and move it with your fingers, which is slower and more error prone than the fancy adjusters available on more expensive sights. Other than that, this is fine and would be good for many applications. Feels sturdy and well built, too.

Works great the quality out of this sight blew me away. All aluminum construction, great set screws. My buddy replaced his 5 pin Matthew's bow sight with this and we had it zeroed with ease at 20, 30, and 40 yards with in minutes.

Easy to install and adjust. It came with everything stated in description.

You get what you pay for, and in this case the low price justifies the quality tradeoffs from more expensive sights. The mounting arm is solid, and the sight body itself, which is a plastic material, is decent enough quality. Pins themselves are rather large, and there is very little length to the fiber portion to get good light collection. Don't expect to shoot in low light with this. The level, while nice to have, is super small and either out of the way or difficult to see depending on your preferences. I picked one of these up used from Amazon and it arrived like new, but for $12 shipped I don't regret the purchase. I am looking to upgrade already, but once I do that will be a $100+ sight rather than the $30-50 versions from other manufacturers.Update (1/3/15):My first archery deer was taken using this sight in November, and it performed well. The sight isn't terribly bright in really low light, but is satisfactory until the last 15 minutes of legal hunting hours. I did end up torquing my shot slightly on the deer, which I attribute to my not paying attention to the very small level.Having purchased this sight allowed me to understand what I was looking for in a replacement, and I ended up purchasing a second hand Sword Apex Hunter with 0.010" pins. Note that this is also an inexpensive sight, but it has a larger level, significantly smaller pins, and collects more light for brighter pins towards the limits of legal shooting hours. I will keep the reviewed sight for backup purposes, as it performed well and may be used for another bow in the future.

It is perfect I love it just got it put on my bow and already got it sighted in LOVE ITTTT❤️❤️

Fit great on an old Hoyt thanks