DROK Volt Amp Meter, AC 500V 200A Digital Voltmeter Ammeter Panel, 0.39 Inches LED 2in1 Multimeter, 2-Wire Voltage Amperage Tester Gauge with Current Transformer
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7

DROK Volt Amp Meter, AC 500V 200A Digital Voltmeter Ammeter Panel, 0.39 Inches LED 2in1 Multimeter, 2-Wire Voltage Amperage Tester Gauge with Current Transformer

4.4/5
Product ID: 37497983
Secure Transaction

Details

  • Brand
    DROK
  • Power Source
    Corded
  • Style
    Voltage Tester
  • Color
    Green Black
  • Item Weight
    0.05 Kilograms
AC 60-500V
📊0.39" LED Display
🔋0-200A

Description

🔌 Power Up Your Measurements with Style!

  • SAFETY FIRST - Designed with a protective back cover for enhanced safety during use.
  • BUILT IN CALIBRATION - Easily adjust your measurements with the integrated trimmer potentiometer.
  • FLEXIBLE INSTALLATION - Mount it anywhere with ease, thanks to its versatile design and included current transformer.
  • POWER FROM THE SOURCE - No extra power source needed—this meter draws power directly from the circuit being measured.
  • PRECISION MEETS CONVENIENCE - Experience dual readings of voltage and current simultaneously with a vibrant LED display.

The DROKDROK Volt Amp Meter is a cutting-edge digital multimeter designed for professionals, featuring a measuring range of AC 60-500V and current up to 200A. Its clear LED display shows both voltage and current simultaneously, while the built-in current transformer and easy installation make it a must-have tool for any electrical setup.

Large manufacture image 1Large manufacture image 2
Small manufacture image 1Small manufacture image 2Small manufacture image 3Small manufacture image 4Small manufacture image 5

Have a Question? See What Others Asked

Can this be installed at a breaker box on a 200amp main breaker?
Power source? Does this run off the power of the circuit being tested or does it need a separate power source? Is it "self powered"?
I need this meter to measure ac volts and dc volts thanks
The paperwork doesn't show the cutout size. Does anyone know how big the hole needs to be?

Reviews

4.4

All from verified purchases

P**N

Easy to read

It has a nice bright display

K**R

Great

Great

K**T

Great solution for Generator circuit load monitoring

I needed a solution to monitor volts and amp draw for my generator that is connected to my main panel by interlock. I wanted a solution next to the panel instead of at the generator, with this I can see exactly what load I am putting on the generator as I turn individual circuits on. If you are not familiar with an interlock - it is an electrician installed lockout safety switch that requires the incoming MAIN circuit to be turned off before allowing the generator circuit to be turned on - which then provides power to the entire panel to the extent your generator can handle the load.My electrician installed a 30amp 220v circuit on the panel and the outlet outside the house as well as the interlock that is specific to my panel type. The new meter only works with the panel in the generator mode and the generator is suppling power.I purchased two of the Drok meters and a box to mount them, worked out well I think as can be seen in the picture. This is the meter showing each side of the panel and the draw on each 10 amps and 12 amps (with most everything turned on short of dryer). By installing two meters I can better balance the load. On the panel switching on a120v circuit will affect only one side of the panel, if you have 220v appliances it will affect both. Visibility is excellent and I checked the AMP measurements and found them to be very close to that of my hand held ammeter.Installation: note that this install should only be performed by an electrician or someone very familiar with the main electric panel, the cover on the panel must be removed and it has live voltage. Install was not hard, just careful planning. Install of the amp meters requires the coils to go around the wires coming into the breaker for the generator, this meant removing the wires from the breaker and inserting them though the coil and reconnecting back to breaker. In normal condition those wires are not hot - only hot when generator is on, so no voltage on them to worry about, but to be safe the main breaker can be turned off. I found a good place where the supply wires were in an open area to put a small dip in the wire to hold the coil in place. The volt meter required one connection to the same hot wire and the second wire to the neutral/ground bus. This was the trickier connection, requiring inserting two wires back into the breaker and finding a place on the bus for the other.My only negative comment about the product was the wires that come with the unit were VERY short, you have to extend them. I used light gauge solid core wire (left over from garage door install) as there is very little power on the wires. I soldered each connection and used shrink tube to prevent a short. Install took about 30 mins for the box cutting and 60 mins to wire up to the panel, working cautiously.As a side note I also purchased the Westinghouse WGen9500DF Dual Fuel Portable Generator from Amazon and I'm very happy with it. At 8500 watts on propane it has plenty of power for this 30Amp interlock circuit.

T**S

Good meter for price.

so far these are working well, look good and appears to be accurate.. Hope they last.

F**K

Everything

Works great no issues.

K**N

Main line and generator monitoring

Perfect for my needs. I installed two to monitor and compare each phase of my generator output when it is running and one of the phases is L1 of my main line input when the generator is offline. This monitor is on constantly so I will be reviewing the life of this device later. I bought two extra for future replacements.

L**E

Did not display amperage, only voltage.

Why did you pick this product vs others?:Tried two different units. Neither one would display amperage, only voltage. This on a 240v U.S. circuit. Connecting both power leads to the two hot lines of 240v the voltage was displayed. With the induction coil around one or both leads displayed no amperage. I then tried one power lead to one hot line and the other power lead to ground. With the coil around the hot lead. As expected, the voltage then read 120v but still no amperage. Returned both units.

D**S

A motor repair shop must

No need to use hand held clamp amp reader. Install inline and get test amp reading with zero effort.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
£22.60

Duties & taxes incl.

UKstore
1
Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Neha S.

Excellent communication throughout the order process. Product is perfect.

2 weeks ago

Meera L.

Smooth transaction and product arrived in perfect condition.

3 weeks ago

Drok Volt Amp Meter Ac 500v 200a Digital Voltmeter Ammeter | Desertcart GB