128OZ Mini Keg Growler, Pressurized Home Dispenser System with Self-Closing Design Faucet Keeps Carbonation and Fresh for Homebrew, Craft and Draft Beer

Very easy to use and assemble and keeps my beer cold for hours. I put about 20 reusable ice cubes in this and keep it in the freezer in between uses and it does a very good job at keeping my beer cold. It was easy to assemble and it pressurizes well and holds pressure just as well. My only complaint is the opening is so small and the keg so tall it is nearly impossible to fill with beer without 1/2 a tank of foam, even when filling while the keg is nearly sideways. I’ve gotten so I just refill it on its side as slowly as possible and then use the hose that comes with it to suck out all of the foam during filling. This has worked the best, even more so than lock hosed funnels.

Neat little device. I changed the gas to a regulator for a soda stream can.I had a problem with the tap and they sent me a new one. First rate.

Update - It turns out, that it matters which way you install the spring in the faucet! Put the wider side on the keg side and the smaller side against the faucet ball part. Support was very kind to reach out and give me some troubleshooting tips. They were very responsive!Original: Product is a good size, but I just spilled a stout all of my carpet because the handle is defective. I poured myself a glass, closed the handle, but beer just kept spewing out!

Works great holds co2 well

Great little keg very easy to assemble and puts out a great draft beer, purchase the co2 cartridges that they recommend with this keg.

The actual operation and quality of the product is 5 star after you set up correctly.Also, this does not carbonate the liquids that you put in the mini keg. You must put in liquids that are already carbonated and this will keep them carbonated. The C02 cartridges are strictly to pressure the keg. I initially purchased this to carbonate water but its not for that. Again, does not carbonate the liquids.The directions it comes with is a 2.5 star. There are several components that the product comes with and has no real description of what it does, how to install, use it or properly secure them.For example, and I believe I saw this on a different comment but there is a spring that the directions say to simply put in between the Faucet and the Spear. Which is fine, but the spring is tapered, like a cone and it matters which way you install this. If you incorrectly install it, the faucet will leak when you add the c02 cartridge. I made this mistake and water poured out and got over paperwork, electronics, board games, books etc etc... pretty annoying that the directions would not give you the correct way to install an important piece like this. To be fair, the directions say that this product will work without the spring but what's the point of having the spring then? The directions don't say why the spring would be needed. In my head, I automatically think its better pressure, a little more secure etc... but there is no mention on why its needed.Second, the knob is secured at its base by a circular, ribbed fastener. This is pretty lose and I had to use a pair of plyers with a rag over it to gently tighten. Usually these are hand tightened but again there's no mention in the directions if it needs to be hand tightened or gently/securely tightened with tools.Third, after figuring all that out, when adding the regulator with c02 screwed in, once it is tightened, you are presumably finished. Mine however, slowly leaked the c02 and the troubleshooting section of the directions were unhelpful and not part of any of the fixes for the issue. I figured out that the threaded portion that is attached to the spear was not tightened enough, causing the leak. Again, not in the directions to make sure its tightened and not mentioned in the trouble shooting section. Also, does not supply a proper wrench to tighten it. I used about 5 c02 cartridges to figure out where the leak was coming from.These are three significant things that can happen and if they were mentioned by the directions, without having to call the company (which I didn't, nor should you have to) would be easy to fix.The product does work great though after it is set up properly. The company has to give you proper directions though.

I'm on my second filling and this mini keg works great! Keeps good pressure and was easy to assemble and clean.The only moderately annoying thing is the regulator/CO2 attachment needs to be turned a bit too much and the CO2 cartridge can end up above 0/180 degrees (top of CO2 cartridge below the bottom of CO2 cartridge). I have it very slightly loose to keep it below 0/180 degrees and it's holding pressure, but it can be loosened by accidentally bumping it even just a bit.Otherwise, this is a fantastic mini keg!

“ update“ “ update“ “ update“ “ update“The seller of this product contacted me via email. Bottom line the company is going to make everything correct!They are replacing the item purchased no questions asked. This is the type of company that we’d like to deal with! Honest answers from an honest company doing the right thing and standing behind their product! Thank you.Assembled this product after washing all its parts, poured in my beverage, kept the unit capped as stated in instructions. First couple of beers were great. Seemed everything worked fine. Next day no pressure there would barely come out. To me I think it’s much easier just crack open a bottle and drink it. A waste your money